5E3 Fender Prototype Three

I have begun to build a new amp. This is 5E3 Prototype amp project number 3 which is very similar to my last guitar amp project.  I have used the aluminum chassis identical to the last time around. I have used the same circuit as the Fender 5E3 Deluxe 57 as before however, I have a very large power transformer. I am expecting this to be quite similar to the last 5E3 that I did but the changes are mostly mechanical and component placement. This time the whole amp is reversed with the Power transformer on the left and the pre-amp circuits on the right. This time the amp arrangement is the proper way around. I had the last one configured backwards.

The chassis is covered with green tape to keep the aluminum from getting scratch up while in construction.

 

Basic Amp Chassis in tape

Basic Amp Chassis in tap

Testing Components

Testing Components

IMGP0434

Input for power and output for 8 ohms and a external

 

One Response to 5E3 Fender Prototype Three

  1. Pingback: 5E3 Fender Prototype 3 Amp Project | North of 49 Technologies

Leave a Reply